MG-3 Marking Gage

Inset into the solid brass beam is a dead accurate, photochemically etched satin-chrome rule, available in either English (1/32s) or metric (mm). On the non-business end of the head is an adjustable read-out sleeve. Lock the beam in position with the cutter flush with the face of the head and set the read-out sleeve to 0". From this initial setting, which likely will not need to be adjusted for years, the MG-3 Marking Gage can be set to any distance up to
six inches to 150 mm quicker than you can say "snickerdoodle". Dimensions as tight as 1/64" are easily attainable by setting between the 1/32" marks. For those of you who are not used to the treat of a ruler with your marking gage, we offer the MG-3 in a basic version.

The head (the portion of a marking gage that fits you hand) of our introductory Signature Series is made from solid rosewood, double brass faced for generations of faithful service. Nicely contoured to fit any size hand, and balanced by the solid brass beam, the MG-3 Marking Gage is unlike any similar tool and will exceed all your expectations as well as inspire your imagination. The locking knob and the beam finial are wood infilled, completing a design that will be a proud addition to your shop or tool collection.

Mortise and tenons, dovetails, lap and half lap, or any wood joint layout will benefit with the use of the MG-3 Marking Gage.

Optional HP-6v2 Dovetail Kit Accessories:
•    12” Long Male Dovetail Guide (will make both left and right tapered cuts) with two hangers.
•    24” Long Male Dovetail Guide (will make both left and right tapered cuts) with two hangers.
•    HP-6v2 Dovetail Iron
•    HP-6v2 Dovetail Scoring Cutter
•    HP-6v2 ½” Dado Profile
•    HP-6v2 ⅜” Dado Profile
•    HP-6v2 Mini Multi Plane Body
•    HP-6v2 Guide Fence System
•    SP-26 Sliding Parallel

Customer Reviews

Read Reviews | Write a review

This item is no longer in production and is not available for purchase. It is listed here for reference purposes only. The last known published price is listed below.

Regular price $129.00

Inset into the solid brass beam is a dead accurate, photochemically etched satin-chrome rule, available in either English (1/32s) or metric (mm). On the non-business end of the head is an adjustable read-out sleeve. Lock the beam in position with the cutter flush with the face of the head and set the read-out sleeve to 0". From this initial setting, which likely will not need to be adjusted for years, the MG-3 Marking Gage can be set to any distance up to
six inches to 150 mm quicker than you can say "snickerdoodle". Dimensions as tight as 1/64" are easily attainable by setting between the 1/32" marks. For those of you who are not used to the treat of a ruler with your marking gage, we offer the MG-3 in a basic version.

The head (the portion of a marking gage that fits you hand) of our introductory Signature Series is made from solid rosewood, double brass faced for generations of faithful service. Nicely contoured to fit any size hand, and balanced by the solid brass beam, the MG-3 Marking Gage is unlike any similar tool and will exceed all your expectations as well as inspire your imagination. The locking knob and the beam finial are wood infilled, completing a design that will be a proud addition to your shop or tool collection.

Mortise and tenons, dovetails, lap and half lap, or any wood joint layout will benefit with the use of the MG-3 Marking Gage.

Optional HP-6v2 Dovetail Kit Accessories:
•    12” Long Male Dovetail Guide (will make both left and right tapered cuts) with two hangers.
•    24” Long Male Dovetail Guide (will make both left and right tapered cuts) with two hangers.
•    HP-6v2 Dovetail Iron
•    HP-6v2 Dovetail Scoring Cutter
•    HP-6v2 ½” Dado Profile
•    HP-6v2 ⅜” Dado Profile
•    HP-6v2 Mini Multi Plane Body
•    HP-6v2 Guide Fence System
•    SP-26 Sliding Parallel

Customer Reviews

Read Reviews | Write a review