TS-1v2 Try Square

TS-1v2

6000406

$81.99
Regular price $81.99

The TS-1v2 Try Square, is the smallest of the Bridge City set of three fixed blade try squares; has all the same high- quality features of the larger ones and is designed to be a perfect fit for your smaller projects.

Note:  The Try Square has been designed by John Economaki with an orange insert in the handle which is loose-fitting and allows the tool to be taken apart, should it need to be re-squared.  It also permits a secure grip when squaring stock. The orange insert does not affect the functionality of the tool. 

Read More

Features/Benefits
5” hardened stainless steel blade accurate to .002”. The blade is treated to be corrosion-resistant and have a superior matte finish which is non-glare and easy to mark with a pencil. The corners are rounded to avoid damage if dropped. The handle is ergonomically designed for a comfortable grip and it is easy to hold in any orientation. The handle design allows for the blade to be re-squared if needed. An 8:1 dovetail cutout provides for convenient layout of dovetails on any edge.

Dimensions
Overall length: 3” (75.7mm)
Height: 5”
Width:1-1/32 (26.2mm)

What’s Included

TS-1v2 Try Square

Customer Reviews

Read Reviews | Write a review

Why is the orange insert in the handle of the T-squares loose?

The rattling in the Try Squares is normal and is present with all of the units. It does not affect the functionality of the tool and was part of the design of all our Try Squares. The looseness allows one to take the tool apart, if need be, should it need to be re-squared.  It also permits a secure grip when squaring stock. As John Economaki often commented, "the colored insert is a fun way to entertain the user.  Layout tools are just like rattles to woodworkers.  They bring joy."

 

How do I re-square my try square?

The TS-2v2, the TS-1v2 and the TS-1.5v2 Try Squares are field adjustable. This means the accuracy of the square can be adjusted by the user.

Here’s how;

IF YOU HAVE A KNOWN 90 DEGREE REFERENCE

1) Using the proper sized hex-key wrench, loosen one screw and then tighten it just a little bit. Loose the other three screws.

2) Place the square against a known 90 degree reference and note which way the blade needs to be adjusted.

3) Clamp the blade of the square in a wood vise. Gently tap the handle in the direction needed to make the square mate with the reference. This may take three or four attempts. Once it mates, tighten the one screw that was semi-tight, check again for square and then tighten the remaining three screws.

4) NOTE: The set screws are stainless steel. If you tighten them too tight, you will break the head of the screw off and the tool will need to be sent back to Bridge City for repair. DO NOT OVER TIGHTEN THESE FOUR SCREWS!

IF YOU DO NOT HAVE A KNOWN 90 DEGREE REFERENCE:

Using a known straight reference, align the square flush with the reference and scribe a line. Flip the square 180 degrees and scribe a second line. By splitting the distance at the widest end, an empirical 90 degrees can be determined. Using the technique described above, adjust the square until there is no gap when the square is flipped against the straight reference.

Working with tools which fit the job is always the best option. Would you want to use a framing square when building a small jewelry box? The 5” blade of the TS-1v2 is a perfect for these small jobs and it fits in your apron pocket too! This try square has all the same features as our larger squares. The blade is hardened stainless steel so that you can use a marking knife without concern of damaging your blade. It is accurate to .002” on the outside and inside edges. The blade is passivated to improve resistance to corrosion; glass bead-blasted to give it a non-glare matte finish and you can mark it with a pencil and easily wipe it clean. There are no scales, making it great for transferring the pencil marks from one work piece to another as needed. The blade also has an 8:1 dovetail cutout for quick convenient dovetail layouts. It is also slightly rounded on each of the corners to avoid deformation should you drop it. The ergonomic handle is made of two anodized aircraft-grade aluminum mirror-image pieces which provide a secure foundation to hold the blade. Its design provides a “positive grip” so that it can be used in many orientations with less chance of dropping it. The orange anodized aluminum trim piece adds to the beauty of the square and it is functional in that it allows for the disassembly of the square if it needs to be re-squared or fixed. Also, the rattle is intentional to add to the uniqueness of this try square. The TS-1v2 will become one of your ‘forever’ squares. With its stainless steel and anodized aluminum parts, a blade which can be re-squared, an overall beautiful design, and a with little care on your part, you will never need to replace it.

The TS-1v2 Try Square, is the smallest of the Bridge City set of three fixed blade try squares; has all the same high- quality features of the larger ones and is designed to be a perfect fit for your smaller projects.

Note:  The Try Square has been designed by John Economaki with an orange insert in the handle which is loose-fitting and allows the tool to be taken apart, should it need to be re-squared.  It also permits a secure grip when squaring stock. The orange insert does not affect the functionality of the tool. 

Read More

Features/Benefits
5” hardened stainless steel blade accurate to .002”. The blade is treated to be corrosion-resistant and have a superior matte finish which is non-glare and easy to mark with a pencil. The corners are rounded to avoid damage if dropped. The handle is ergonomically designed for a comfortable grip and it is easy to hold in any orientation. The handle design allows for the blade to be re-squared if needed. An 8:1 dovetail cutout provides for convenient layout of dovetails on any edge.

Dimensions
Overall length: 3” (75.7mm)
Height: 5”
Width:1-1/32 (26.2mm)

What’s Included

TS-1v2 Try Square

Customer Reviews

Read Reviews | Write a review

Why is the orange insert in the handle of the T-squares loose?

The rattling in the Try Squares is normal and is present with all of the units. It does not affect the functionality of the tool and was part of the design of all our Try Squares. The looseness allows one to take the tool apart, if need be, should it need to be re-squared.  It also permits a secure grip when squaring stock. As John Economaki often commented, "the colored insert is a fun way to entertain the user.  Layout tools are just like rattles to woodworkers.  They bring joy."

 

How do I re-square my try square?

The TS-2v2, the TS-1v2 and the TS-1.5v2 Try Squares are field adjustable. This means the accuracy of the square can be adjusted by the user.

Here’s how;

IF YOU HAVE A KNOWN 90 DEGREE REFERENCE

1) Using the proper sized hex-key wrench, loosen one screw and then tighten it just a little bit. Loose the other three screws.

2) Place the square against a known 90 degree reference and note which way the blade needs to be adjusted.

3) Clamp the blade of the square in a wood vise. Gently tap the handle in the direction needed to make the square mate with the reference. This may take three or four attempts. Once it mates, tighten the one screw that was semi-tight, check again for square and then tighten the remaining three screws.

4) NOTE: The set screws are stainless steel. If you tighten them too tight, you will break the head of the screw off and the tool will need to be sent back to Bridge City for repair. DO NOT OVER TIGHTEN THESE FOUR SCREWS!

IF YOU DO NOT HAVE A KNOWN 90 DEGREE REFERENCE:

Using a known straight reference, align the square flush with the reference and scribe a line. Flip the square 180 degrees and scribe a second line. By splitting the distance at the widest end, an empirical 90 degrees can be determined. Using the technique described above, adjust the square until there is no gap when the square is flipped against the straight reference.