MT-1 Multi Tool

MT-1

6000802

$160.99
Regular price $160.99

October 15th - October 21st: Purchase a MT-1 or an MT-2 and receive a Mini Miter Square FREE.  Must be purchased as a "bundle" set.  Go to our "shop sales products" on the Home page to order as a bundle.

The MT-1 will be the most versatile layout tool in your shop. Combining the capabilities of a sliding T-bevel, saddle square, marking gauge, and multiple dovetail cutouts, it will prove itself invaluable to you in the shop.

Read More

Features/Benefits
Hardened stainless steel blade works well with marking knives and is accurate to .002” over its length. The blade is passivated and bead blasted to resist corrosion and to provide a matte finish for no glare use and to accept pencil marks which can be easily wiped away. The blade has a 45° tip for quick reference, a pencil notch for making lines parallel to an edge and an 8:1 cutout for making dovetails on curved edges. The handle is anodized aluminum for durability and beauty. The handle has built in saddle squares each of which has a dovetail cutout, one for 8:1 and the other for 6:1, for dovetail layouts on straight edges. The cam lock allows for simple, rock-solid locking versus a thumbscrew; strong enough to let you set it as a try square or double square.

The MT-1 is approximately:

  • Blade length approximately 8"
  • Blade thickness is .080" (2.02mm)
  • Blade width is approximately 3/4" wide
  • Overall length is 11-3/4" long with the blade fully extended from the handle
  • Overall length is 8-1/4" long with the blade folded
  • Overall handle thickness is .928" (23.57 mm) at its widest point.

Product Accessories
None

What’s Included
MT-1 Multi-Tool

Customer Reviews

Read Reviews | Write a review

You may be surprised to see how often you are reaching for this versatile tool when doing layouts in your shop. Primarily a sliding T-bevel for transferring critical angles, the hardened, passivated, and glass bead blasted stainless steel blade is not only accurate to .002” along its length, but tough enough to use it as a layout gage with a marking knife. Stray cuts from a marking knife will not damage it like an aluminum blade. A pencil notch at one end lets you make parallel lines with the edge of your workpiece. You can also make pencil marks on the non-glare finish and easily wipe them off later.

The handle is finely anodized, aircraft grade aluminum which feels great in your hand and is made to take years of hard use. Incorporated into the handle are dual saddle gages for transferring a line over a corner to the next side of the workpiece which is much more accurate than moving your square and trying to re-align it. Because they pivot, you can accurately transfer over any corner angle. There is a dovetail cutout in each saddle, one is 8:1 (preferred for dovetails in hardwood) and one is 6:1 (for softwoods). There is also a dovetail cutout in the blade which is 8:1 and it allows you to add dovetail layouts to curved pieces. The cam lock for the blade allows you to use one hand to loosen and it provides an infinitely more solid lock than trying to turn a small knob with your fingertips. The lock is solid enough that you could set the Multi-Tool at 90° and confidently use it as a try square or double square if desired. This is as good as it gets in a layout tool; extremely versatile, highly accurate, and durable. Let the MT-1 make you a better and much more efficient craftsman.

October 15th - October 21st: Purchase a MT-1 or an MT-2 and receive a Mini Miter Square FREE.  Must be purchased as a "bundle" set.  Go to our "shop sales products" on the Home page to order as a bundle.

The MT-1 will be the most versatile layout tool in your shop. Combining the capabilities of a sliding T-bevel, saddle square, marking gauge, and multiple dovetail cutouts, it will prove itself invaluable to you in the shop.

Read More

Features/Benefits
Hardened stainless steel blade works well with marking knives and is accurate to .002” over its length. The blade is passivated and bead blasted to resist corrosion and to provide a matte finish for no glare use and to accept pencil marks which can be easily wiped away. The blade has a 45° tip for quick reference, a pencil notch for making lines parallel to an edge and an 8:1 cutout for making dovetails on curved edges. The handle is anodized aluminum for durability and beauty. The handle has built in saddle squares each of which has a dovetail cutout, one for 8:1 and the other for 6:1, for dovetail layouts on straight edges. The cam lock allows for simple, rock-solid locking versus a thumbscrew; strong enough to let you set it as a try square or double square.

The MT-1 is approximately:

  • Blade length approximately 8"
  • Blade thickness is .080" (2.02mm)
  • Blade width is approximately 3/4" wide
  • Overall length is 11-3/4" long with the blade fully extended from the handle
  • Overall length is 8-1/4" long with the blade folded
  • Overall handle thickness is .928" (23.57 mm) at its widest point.

Product Accessories
None

What’s Included
MT-1 Multi-Tool

Customer Reviews

Read Reviews | Write a review

 

To layout dovetails;

 

1. Use the either dovetail square to layout a reference line. Next, adjust the sliding bevel arm to this line and lock in place. This will allow the user to use the dovetail leg first as reference to set the  ‘T” Bevel for all the reference lines.  This is mandatory if the dovetails are longer than the saddle square arm.

 2. One can put a business card or other small uniform thickness between the body and the stock and scribe from heel to toe.

3.  One can simply make a reference line and then realign the tool and continue the mark.