A gift as precise as the work.
Why is the orange insert in the handle of the Miter Square loose and rattles?
The rattling in the miter square is normal and is present with all of the units. It does not affect the functionality of the tool and was part of the design of all our miter squares. The looseness allows us to take the tool apart, if need be, should we need to re-square/fix the tool.
Of all the different wood joints you will make, one of the most difficult is one of the simplest – the miter joint.
Here’s why this joint can be so frustrating. Let’s say you are making a frame and your layout tool is off by 0.003”. That is ONLY three one thousandths of an inch.
If you have ever made a frame where three joints are perfect and the fourth has a bad case of GAPOSIS, the problem is likely your 45-degree reference. That little 0.003” error multiplied by the eight cuts means that fourth corner now features an ugly 0.024” gap which is just under 1/32” of an inch. That is an ugly gap, and it is the province of amateurism and it is completely avoidable.
The MS-1v2 is the smallest miter square we make (with a handle) and it is perfect for picture frames and smaller scale work.
All our Miter Squares feature the following: