JS-2 Ryoba Rip/Crosscut Saw

JS-2

703000055

$77.00
Regular price $77.00

The Ryoba has crosscut teeth on one edge and rip teeth on the opposite edge, making perfect economical sense. Our Ryoba has a cutting length of 9" and is perfectly sized for furniture or cabinetmakers, and also works well for finish carpenters. The crosscut saw has 15 teeth per inch, the rip saw 8 teeth per inch. Blade thickness is a robust 0.49mm (0.0195"). Overall length is approximately 24". A great saw when you are not cutting joints or miters.

All of the Japanese saws made in Japan for Bridge City feature blades with a golden hue. This color appears during the heat treating process and is normally ground off to reveal the traditional silver color of steel. We insist that it not be ground off so you know the blades are properly tempered. 

We highly recommend having a replacement blade on hand as most of these saws feature teeth that have up to four facets ground on each tooth making them all but impossible to sharpen by hand.

Japanese Saws cut on the pull stroke, and because the blades are under tension during cutting, the blade thickness can be much thinner than European heritage saws. A thinner blade means less material is removed and requires much less effort to use. With a little practice, your cuts will look like they were made with a laser.

In soft woods, Japanese Saws cut so efficiently, it is hard to believe it is made by hand. In hard woods, as in all hand sawing operations, let the saw progress at its pace and apply very little downward pressure. Cuts are started at the back of your stock as you pull forward.  Aggressive and impatient users will invariably break teeth on these saws which defeats the purpose of owning a precision saw.
NOTE:  The handle of the Japanese Saw is wrapped in Rattan which is a natural material and therefore may have slight marring or imperfections.

Will these soles fit the original brass HP-6 Body? No, there are not screw holes to attach to the HP-6 Body.

Customer Reviews

Read Reviews | Write a review

The Ryoba has crosscut teeth on one edge and rip teeth on the opposite edge, making perfect economical sense. Our Ryoba has a cutting length of 9" and is perfectly sized for furniture or cabinetmakers, and also works well for finish carpenters. The crosscut saw has 15 teeth per inch, the rip saw 8 teeth per inch. Blade thickness is a robust 0.49mm (0.0195"). Overall length is approximately 24". A great saw when you are not cutting joints or miters.

All of the Japanese saws made in Japan for Bridge City feature blades with a golden hue. This color appears during the heat treating process and is normally ground off to reveal the traditional silver color of steel. We insist that it not be ground off so you know the blades are properly tempered. 

We highly recommend having a replacement blade on hand as most of these saws feature teeth that have up to four facets ground on each tooth making them all but impossible to sharpen by hand.

Japanese Saws cut on the pull stroke, and because the blades are under tension during cutting, the blade thickness can be much thinner than European heritage saws. A thinner blade means less material is removed and requires much less effort to use. With a little practice, your cuts will look like they were made with a laser.

In soft woods, Japanese Saws cut so efficiently, it is hard to believe it is made by hand. In hard woods, as in all hand sawing operations, let the saw progress at its pace and apply very little downward pressure. Cuts are started at the back of your stock as you pull forward.  Aggressive and impatient users will invariably break teeth on these saws which defeats the purpose of owning a precision saw.
NOTE:  The handle of the Japanese Saw is wrapped in Rattan which is a natural material and therefore may have slight marring or imperfections.

Will these soles fit the original brass HP-6 Body? No, there are not screw holes to attach to the HP-6 Body.

Customer Reviews

Read Reviews | Write a review